- DC IN Connector
Connector for receiving the +12V power supply from the AC power box and rear battery.
- VTR Connector
Used to connect VCR or multi-core cable adaptor. In this case, switch the VTR/MA switch on this right
of the camera adaptor.
- Audio Level IND Switch
Used to switch the level meter displayed on the VF. When using a VCR that has a return audio function,
set to "EXT" and otherwise, set to "INT".
- MIC Switch
Set this switch according to a kind of the incom mic. "DYN": Dynamic mic, "CAR": Carbon mic.
When using MT-667D-01, set to "DYN".
- RGB DIRECT Switch
Set to "ON" when talking out RGB and SYNC signals from the 26-pin connector.
- CABLE COMP Switch
When using a portable VCR with a cable of 30m, if this switch is set to "ON", the cable loss of video
signal from the VTR connector could be compensated.
- CALL Switch
Used to call the multi-core cable adaptor from the camera.
- TALLY Indicator Lamp
Lights on when the CALL switch of the multi-core cable adaptor is lamp pressed. This lamp also lights
on at VCR recording.
- INCOM LEVEL Volume
Used to adjust the INCOM and Earphone jack volume.
- EARPHONE Jack
Outputs voice currently recorded by the VCR.
- INCOM Mic Switch
Used to switch the INCOM MIC to on or off.
- INCOM Jack
Used to speak with the multi-core cable adaptor.
- Battery Switch
Used when no power is supplied from the DC IN connector.
- VTR/MA Select Switch
Used to switch the VTR or MA operation.
- lVTR mode/MA mode Select Switch
- MIC Level Select Switch
Used to switch the level of a voice signal output from the VTR connector.
- VTR Start/Stop Switch
This switch operates synchronously with the VTR START/STOP switch in the front of the camera head.