HOME DNR20
DNR-20   Dockable Disk Recorder




DNG Camera Accessories:
DFPSA
Desktop Field Pak Adapter


DNE-11 Transporter

FP-2 Fieldpak



Innovative direct nonlinear recording for nonlinear editing with no digitizing. The Drive you record on is the same Drive that is used by the editor.

Time Lapse Recording, Intelligent recording, and RetroLoop : Features only the DNR-20 Disk Recorder can offer.

Two interface connections are available:
79-pin for high-end UNICAM HL-57/59 cameras, 50-pin for HL-45/HC-400 cameras. Connect the DNR-20 as a direct replacement for the traditional VCR.

Compatible AVID MediaComposer, Xpress, Symphony and NewsCutters for maximum flexibility.

DNR-20 plus FieldPak 2 package offers high reliability, stability and portability for field use.

Extremely low maintenance because there is No Tape Transport! No upper drum assemblies to replace or heads to clog. Virtually all the recorder moving parts are in the FieldPak.

High Quality Video
DNR-20 is now supporting the Avid video compression of AVR75(70BH), JFIF(3:1/10:1) or DV(25/50). You can choose AVR/JFIF (or AVR/DV), now, and then add DV (or JFIF) with an optional software upgrade, later on. IMX compression will be released soon as optional software.

 

For Tapeless Acquisition

The DNR-20 is a Dockable Nonlinear DIsk Recorder that uses a Hard Disk Drive instead of video tape as the recording media. A newly developed lightweight FieldPak2, Hard Disk Drive, with the new DNR-20 lightweight recorder package offers features unique to the Editcam2 System.

Also newly designed compact, pocket-sized FieldPak called FP-S4 and newly designed circuits make the compact and lightweight camcorder body possible, without sacrificing many useful features of the Editcam system such as,

  • Instant preview through random access
  • Intelligent recording
  • Good picture quality of 4:2:2, 13.5MHz sampling at 8bit quantization
  • Retroloop function
  • Timelapse recording
    • FEATURES

    • RetroLoop
      RetroLoop function allows you to capture an event up to five minutes after it has occurred. You can designate from 5 seconds to 5 minutes as a "time buffer". This assists you in timing for shooting scenes in the face of unexpected events and also eliminates the need to keep shooting unnecessary tape. This permits the most efficient utilization of the recording medium.

    • Intelligent Recording
      Intelligent recording enables you to start shooting immediately even while viewing the recorded video, which is impossible with video tape.

    • Time Lapse Recording
      Time Lapse recording allows you to record from one frame out of two or up to one frame a day. Surveillance video over a long period of time can be easily captured with this great efficiency.



    HL-59 + DNR-20
    DNR-20/JFIF Digital Non-linear Dockable Disk Recorder with 79pin or 50pin interface Records in JFIF 20:1 & 3:1 for Meridien compatibility, AVR-70BH & AVR-75.
    DNR-20/DV Digital Non-linear Dockable Disk Recorder with 79pin or 50pin interface Records in DVCPRO 25Mbps, DVCPRO 50Mbps, AVR-70BH & AVR-75.
    DNR-20/JFIF/DV Digital Non-linear Dockable Disk Recorder with 79pin or 50pin interface Records in JFIF 20:1 & 3:1 for Meridien compatibility, DVCPRO 25Mbps, DVCPRO 50Mbps, AVR-70BH & AVR-75.
    SPECIFICATIONS
    Power Requirement : DC+12V (+11 to +17V), less than 18.0W
    Ambient Temperature
    (degrees Celsius)
    : 0 to 40 (Operating)
    Humidity : Less than 85% (no condensation)
    Dimensions : W212 x H247.8 x D130mm (8.35 x 9.76 x 5.12inches)
    Mass : 3kg approx. (6.61lbs)
    Sampling : 4:2:2 13.5MHz/8bit
    Disk Recording Time : Approx. 70min. (at 16GB / DV25)
    (Depending on picture contents and video resolution)
    Input Signals
    Camera Video Input : Y,Cr,Cb/0.7Vp-p
    External Video Input : 1Vp-p, positive (BNC)
    Audio Input : 2ch, 3-pin, -60dB/+4dB balanced
    Output Signals
    Program Video Output : 1Vp-p/75,positive (BNC) (SMPTE-170M)
    Monitor Video Output : Y signal output of monitor video signal available.
    Audio Output : 2ch +4dB, 600, balanced (output level variable)
    * Editcam is registered trademark of Ikegami Electronics (USA). "FieldPak" is a Registered Trademark of Avid,"AVID DNxHD" and "CAMCUTTERare trademarks of AVID."SAT" and "VDP" are trademarks of NL Technology.

    Design and specifications are subject to change without notice.
    Home | All Products | Contact | Site Map |