![]()
HOME
HL53AHL-53A 3CCD Compact, Lightwight, ENG Camera | ||
![]() HL-53A with Beta-SP VCR
|
The HL-53A is a broadcast color camera, incorporating a newly developed IT (Interline Transfer) CCD image sensor. Ikegami's advanced technology has been fully utilized to achieve not only this compact, lightweight design, but also reproduction of color-fidelity images with enhanced resolu- tion and high S/N ratio. Since a VCR interface is incorporated, the HL-53A can be used in conjunction with a Betacam VCR without the aid of any adapter. A newly developed IT CCD with microlens technology and total number of 400,000 pixels delivers enhanced picture quality, ensuring satisfactory image quality even in the HI-GAIN position with a dramatic reduction in fixed pattern noise. Furthermore, smear is reduced to such a level as can only be achieved by the FIT CCD. The HL-53A also takes full advantage of the characteristics of CCDs such as long service life, reduced image lag, low power con- sumption, and no burn-in. | |
Features
|
| [ Mechanical ] | |||||||||
| 1) Dimensions. |
95(W) X 230(H) x 155(D) mm 3.7(W) X 9.0(H) X 6.1(D) inches |
||||||||
| 2) Weight. | 3.1kg. (6.8 lbs.) (with 1.5" VF) | ||||||||
| 3) Lens mount. | Bayonet (interchangeable with HL-95/79E) | ||||||||
| 4) Optical filter |
|
||||||||
| [ Electrical ] | |||||||||
| 1) DC input signal: | 12V (11-16V) | ||||||||
| 2) Power consumption | 14W | ||||||||
|
3) External sync input signal for genlock | VBS 1Vp-p or BBS 0.45Vp-p | ||||||||
| 4) Return video signal | VBS or VS 1Vp-p | ||||||||
| 5) MIC input. | -60dBm | ||||||||
| 6) Tally input. | Power/Contact (with CA-95C) | ||||||||
| 7) Intercom. | 2-wire/4-wire (with CA-95C) | ||||||||
| 8) Sensitivity. |
2000 lux @ f8 Under the following condition Color temperature 3200°K Reflectance 89.9% Gain 0dB Gamma Linear Aperture, Detail, Matrix All off Bandwidth 4.2MHz |
||||||||
| 9) Gain switchable |
0, +9, +18dB (STD) 0, +6, +12dB 0, +12, +18dB 0, +6, +18dB * Selectable by internal switches |
||||||||
| 10) Signal to Noise Ratio. | 62dB | ||||||||
| 11) Resolution. |
H: 700TVL V: 400TVL |
||||||||
| Registration | 0.05% or less-all zones (excluding lens) | ||||||||
| 12) Video output signal: |
VBS 1Vp-p, 75 ohm, 1 output Component output 1 ch R.G.B. output 1ch |
||||||||
| 13) VF video. |
R+G+B (normal) or Monitor output signal selected by the monitor switch |
||||||||
| 14) Monitor output signal. | R, G, B, R-G, B-G, R+G+B, ENC | ||||||||
| 15) Shutter speeds: | 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000 seconds | ||||||||
| [ CA-53 Camera Adapter ] | |||||||||
| Dimensions |
96(W) x 240(H) X 89(0) mm 3.8(W) X 9.5(H) X 3.5(0) inches |
||||||||
| Weight | 1.1 kg. (2.4 lbs.) | ||||||||
| Input signals |
External sync for genlock : VBS lVp-p or BBS 0.45Vp-p Return video signal : VBS or VS 1Vp-p MIC : -60dBm 600 ohm (balanced) DC input : 12V (11-16V) |
||||||||
| Output signals |
Video : Composite video RGB video : 1 output 75 ohm Component : Y, R-Y, B-Y Audio : -20dBm 600 ohm (balanced) |
||||||||
Design and specifications are subject to change without notice. |
| Home | All Products | Contact | Site Map | |