HOME

PM-1430A   14-inch Broadcast Monochrome Monitor

  

The PM-1430A monochrome monitor provides high resolution and brightness, have low geometric and differential gain distortion, with excellent stability over a wide temperature, input voltage and APL range.
Ikegami PM 1430A monochrome monitors provide features and performance characteristics necessary for professional broadcast production and applications, and this monitor configurations are for cabinet use or for 19-inch rack mounting in a 6U 10-1/2 inch height.  Slides are optional for the rack mount versions.

  • Back porch clamp, switchable to DC restoration
  • Dual (A/B) inputs, front panel selectable
  • Internal/external sync, front panel selectable
  • Notch filter on/off, front panel selectable
  • Tally light (Red and Green)
  • Remote Control (VIDEO SELECT,   SYNC SELECT, TALLY ON/OFF)
Specifications
GENERAL
Power AC 100-120V/200-240V±10% 50/60Hz, 55W approx.
Ambient Temperature 0°C-+40°C (32°F-104°F) 90% or less relative humidity (non-condensing)
External Dimensions 428X265X422 mm (16.85"Xl0.43"X16.61")
Weight approx. 13.3 kg (29.1 lbs) (with case)
Connector Video input: BNC type (2 systems)
Sync input: BNC type (1 system)
Remote input
Tally input
Front Panel Controls Video A/B, Sync INT/EXT, Size NOR/WIDE, Contrast (Manual/Preset)
Brightness (Manual/Preset), Power ON/OFF,  Notch filter
ON/OFF, H and V delay switches
Standard Accessries Remote connector, power cord and operation manual
RATING
Input Signal 2 video inputs, 1 sync input
Input Level Video signal: VS 1.0Vp-p or V 0.7Vp-p positive, Sync signal: 1-4Vp-p
Input Impedance Video input: High impedance, bridge connection
(Return loss: 46dB (100Hz-4.2MHz))
Sync input: High impedance, bridge connection 
(Return loss: 40dB (5MHz)
Output Level 30Vp-p (at CRT drive voltage)
CRT 340CEB4 or Equivalent
Phosphor Colorimetry P4 phosphor, 6500°K (Option: 9300°K)
Brightness 60 Ft-L (at rated output level)
Operation Continuous
Video Display Screen NOR/UNDER switching system, pulse cross circuit provided
PERFORMANCE
Resolution at Brightness of 30 Ft-L Center: 800 lines or more, Corners: 500 lines or more
Power Voltage Fluctuation Should the voltage fluctuate ±10% against the rated input voltage, monitor stability and picture quality do not deteriorate.
VIDEO CIRCUIT
Max. gain Max. contrast: 35dB or more
Frequency Response 100kHz reference, 50Hz-10MHz ±1dB (at 30Vp-p of output level)
Waveform (When square wave of rise time 0.05usec. is supplied at video input connector,)
Rise time: 250kHz, 0.1,usec or less
Overshoot: 250kHz, 8% or less
Sag:      60Hz, 5% or less
Linearity Less than 5% Differential Gain (at rated output 30Vp-p)
Noise Coherent noise: -46dB
Hum noise:     -55dB
Others:        -55dB
(except blanking period) (Measured at output terminal in condition of terminating video input 75 ohm and contrast control maximum.)
DEFLECTION CIRCUIT
Sync Stability The stability of operation shall be met for the following conditions.
(1) Internal sync
   a. Video input level changed against rated value:    -l0dB
   b. For video amplitude changes of 0 to 120% and sync levels greater than -6dB (0.15 to 0.3V sync).
(2) External sync
Sync signal input level:  1-4Vp-p, negative
Horizontal AFC Time Constant approx. 2 msec.
Deflection Distortion Less than 2% of picture height
HIGH VOLTAGE CIRCUIT
High Voltage 16kV±0.5kV
High Voltage Fluctuation ±2% in range of 0-200uA as 100uA reference
Design and specifications are subject to change without notice.
Home | All Products | Contact | Site Map