Specifications
| GENERAL |
| Input Voltage |
100V- 120V AC ± 10%, 50/60Hz, Single Phase (JPN, USA)
200V-240V AC ± 10%, 50/6OHz, Single Phase (EUROPE)
(Switchable from the internal connector) |
| Power Consumption |
Approx. 40W (Standard) |
| Ambient Temperature |
0°C- +40°C, 90% or less relative humidity (non-condensing) |
| Dimensions |
222(W) x 213(H) x 352(D) mm (8.7 x 8.4 x 13.9 in.) |
| Weight |
Approx. 10kg (22 lbs) |
| RATING |
| Input Signal |
Video: 2 inputs
Y/C: 1 input
RGB/Y, PB, PR: 1 input (Swichable at rear panel)
Digital Video: 1 input (OPTION)
Sync: 1 input |
| Input Level |
Video Signal : Composit 1.0Vp-p / Non Composit 0.7Vp-p
Y/C Signal : Y Signal 1.0Vp-p / C Signal 0.286Vp-p (burst level)
RGB or Y, PB, PR :
(RGB Signal)
G signal 1.0Vp-p (Sync on Green) or 0.7Vp-p / R/B signal 0.7Vp-p
(Y, PB, PR Signal)
N10/SMPTE Format / Y 1.0Vp-p(SynconGreen) or 0.7Vp-p
Setup: 0Vp-p / Sync: 4Vp-p ± 2Vp-p
PB/PR: 0.525Vp-p
Digital Video:
Dl:CCIR Rec601 (4:2:2 Format) / D2/D3: SMPTE standard
Sync Signal : Composite Sync 4Vp-p ± 2Vp-p |
| Connection |
Video/RGB or Y, PB, PR:
Bridging BNC connectors, high impedance with termination swich
Y/C: 4 pin plastic connector, single end.
75 ohms terminated.
(7 pin metal connectors are OPTION) |
| Remote Controls |
a) Video input select
(A/13/YC/RGB or Y, PB, PR, Digital)
b) COLOR/MONO seiect
c) Tally (ON/OFF)
d) 16:9
e) SYNC INT/EXT |
| PERFORMANCE |
| CRT |
In-line gun, Dot-shadow mask, medium resolution CRT |
| Mask Pitch |
0.28mm |
| Resolution (at center) |
450TV lines |
| VIDEO SIGNAL SYSTEM |
| Frequency Response |
Measured with Aperture Gain 0
60Hz - 5MHz: flat within + 1/-3dB |
| Chrominance Rejection |
Less than -24dB (with aperture correction 0) |
| Ratio Noise |
Coherent noise: Less than -40dB
Other noise: Less than -50dB |
| COLOR SIGNAL SYSTEM |
| Demodulation Axis |
R-Y, B-Y System |
| Frequency Response |
3.58MHz +/-0.5MHz +1/-3dB
(measured at chroma output test point) |
| SYNC SYSTEM |
| Sysnc Stability
| Stability of synchronization will be met for the following conditions.
a)Internal Sync
Video input level within ±6dB against the rated value of 1.0Vp-p
b)External Sync
Sync Signal input level of 1.0 - 8.0Vp-p |
| AFC Time Constants |
SLOW: Approx. 2.0msec.
FAST: Approx. 0. 5msec. |
| DEFLECTION SYSTEM |
| Scanning Frequency |
Horizontal: Nominal 15.734kHz
Vertical: Nominal 59.94kHz |
| Scanning Amplitude |
Normal Scan :
Overscan is 1% of CRT effective area with an aspect ratio of 4:3
Underscan : - 14% of normal scan |
| Geometry and linearity |
Less than 2% of picture height |
| Convergence Error |
Center:
Inside a circle with diameter of 80% of picture height: Less than 0.5mm
Corner:
Outside area of picture center Less than 1.2mm |
| HIGH VOLTAGE |
| Tolerance |
18kV ± 1 kV |
| Regulation |
±5% over the range of 0 - 300uA referred to 100uA |
| OPTION |
DK1071 D1Digital Kit
DR-1016A Rack mount adapter
DK1072N/P D2(D3)Digital Kit
DC1071 DC12-24V Input Module
SF1071 Special Function Module
SRC301 Serial Remote Controller
|
HOME
TM10-17R/TM1017R/TM1017RA
)
