HOME HSS2000

HSS-2000    Multi-format Digital Switcher


 
 

The HSS-2000 is designed to handle the demands of today's television broadcasting environment. The flexibility to accept multi-format signals and 16:9/4:3 aspect ratio conversion for 4 M/E channels makes it possible to deliver HDTV format (1080i/720p*/480i*/480p*) live program production in the studio or a mobile facility while continuing to deliver the current 4:3 SDTV format live program production for years to come. By assigning M/E and AUX to HDTV and SDTV independently, programs can be produced in parallel. The HSS-2000 enables producers to design multi-format studios and mobile facilities without sacrificing production capacity. *720p/480i/480p are optional.

Features

  • 12-inch TFT LCD Panel
    The operation panel is equipped with a user friendly and easy-to-use 12-inch TFT touch-sensitive LCD.

  • Impressive Number of SDI Input
    A total of 72 inputs are enough to support a number of multi-rate sources. Up to 48 sources inputs (including DVE source), and up to 24 external Keys sources inputs (including DVE Keys).


  • Outputs
    There are up to 12 M/E outputs (MK/PGM/CLEAN/PVW), and 8 AUX outputs. A total of 28 outputs are available with additional 8 outputs by Optional 4ch DVE. Re-clock processing to all AUX outputs make it possible to add optional AVDL ON/OFF function to each output.

  • HDTV/SDTV Conversion
    Each output can be switched between HDTV format or SDTV format.

  • YE Bus
    4 AUX outputs can be used as a VE bus to monitor all inputs (V/K/MK), irrespective or whether they are HDTV or SDTV signals

  • Up to 4 M/E, 4 KEY and 4 SUP available
    Each M/E, KEY and SUP can be switched between HDTV and SDTV. A single sup can control 2 self- or external-key feeds (NAM). Additionally, all 4 SUP can be bundled as a DSK. Finally, up to 4 optional DVE channels can be connected to the HSS-2000.

  • Compact and low power consumption design
    The high density PLD allows a compact 15RU form factor, while the highly efficient power-supply and low-voltage IC means lower power consumption.

  • Redundant power supply
    The power-supply module can be swapped out easily, while the chassis has room for a second power-supply unit for redundancy.

  • Flexibility
    Apart from a 4 M/E configuration, the system can be set up as a 3 M/E or 2 M/E system. The number out outputs can also be tailored to the user's needs.

  • Memory Function for M/E
    All settings can be stored in stored in memory and recalled at a touch of a button.

Rating & Specifications
Input signal
Input feed Up to 48 Inputs HDSDI (SMPTE292M)
HD SDI (BTA S-004B)
SD SDI (SMPTE259M)
External KEY Up to 24 Inputs HD SDI (SMPTE292M)
HD SDI (BTA S-OO4B)
SD SDI (SMPTE259M)
External SYNC Tri-level SYNC(59.94Hz*)
*60Hz option
±0.3V p-p High Impedance
or BBS 0.286V p-p High Impedance
Output signal
M/E Output Up to 12 outputs HD SDI (SMPTE292M)
HD SDI (BTA S-004B)
SD SDI (SMPTE259M)
AUX output Up to 8 inputs HDSDI (SMPTE292M)
HD SDI (BTA S-004B)
SD SDI (SMPTE259M)
 
Video delay 1 H (M/E Output)
Control system delay 2V(32ms) or less (typical)
Delay between switch push and picture change.
Console control ETHERNET BNC 50 ohm cable(185m max.)
General control ARCNET BNC 75 ohm cable
Power down 24 hours or less Automatic recovery as it was.
Longer than 24 hours Initial condition(in case of low back-up voltage)
Power Voltage AC100V/200V ±10% Voltage range allowed 85V-255V
Power consumption Main Frame 1,000VA or less
DVE(2ch) 470VA or less
Operation Console Panel 150VA or less
Operating temperature 0 to 45° C (32 to 113° F)
Dimensions Main Frame H665xW483xD500mm/15RU
(H26.2xW19xD19.7 inches)
DVE(2ch) H177xW483xD500mm/4RU
(H7xW19xD19.7 inches)
Operation Console Panel H150xW1250xD560mm
(H5.9xW49.2xD22 inches)
Design and specifications are subject to change without notice.
Home | All Products | Contact | Site Map