HOME ICD42
ICD-42 1/2" CCD
Black and White 1/2" CCD Video Camera



 

The ICD-42 series cameras offer low light sensitivity in a highly reliable compact CCD format. LSI chips and surface mount technology (SMT) are utilized in the manufacture of this camera. Resolution is 570 TV lines (Typical). The ICD-42 series is available in two voltage configurations, 24VAC (model ICD-4224) and 117VAC (Model ICD-4220). All models feature line lock with adjustable vertical phase for roll-free switching, automatic gain control (AGC), and peak-white clipping circuit. ICD-42 series cameras will accept both C and CS mount lenses. Auto iris connectors are also standard. Genlock is available as an option.

SPECIFICATIONS
Pickup Device 1/2" Interline Transfer CCD
Picture Element 756(H) x 484(V), 380,000 pixels
Sensing Area 6.3 mm(H) x 4.8 mm(V)
Scanning System 525 lines/60Hz, 2:1 interlace
Frequency Horizontal 15.75kHz
Vertical 60 Hz
Sync. System Internal line lock, Phase adjustable
Option : Genlock
Genlock Input Signal (Option) Composite signal
1) VS or VBS: 1.0Vp-p ± 6dB
2) BBS: 0.45Vp-p ± 0.1 Vp-p
3) SYNC: 4Vp-p ± 2Vp-p

Separate signal
1) HD/VD 4Vp-p ± 2Vp-p
In either case, sync signal polarity is negative.
Genlock Input Impedance 75ohm
Video Output 1.0Vp-p, VS Composite
Video Output Load Impedance 75ohm
Resolution Horizontal 570 TV lines (Typical) Vertical 350 TV lines
Signal-to-Noise Ratio 46dB(p-p/rms) or better
Illumination (Color temperature 2850oK)
  Device face *Object
Full Video 0.25 lux (0.023 fc) 2.5 lux (0.23 fc)
Usable Video 0.01 lux (0.00093 fc) 0.1 lux (0.0093 fc)
(Gamma=0.45, AGC ON)
*Measuring condition: Lens F1.4, Object reflectance 89%
AGC Built-in, ON/OFF switchable
Gamma 0.45 or 1.0 switchable
Peak White Clipper Built-in
Auto Iris Function Video signal and + 9V output connectors are standard
Power Requirement ICD-4220: AC117V ± 10%, 60Hz
ICD-4224: AC 24V ± 10%, 60Hz
Power Consumption 7W approx.
Ambient Temperature -10°C- +50°C (13.6°F-122°F)
Lens Mount CS/C mount
Connector Video output: BNC
Auto iris: R05-R3F
Genlock input: BNC (Option)
AC24V Input 2P terminal block (AC24V Type only)
Dimensions (WHD) 70 x 60 x 160 mm (2.76 x 2.36 x 6.3 inches)
Weight ICD-4220: 930g approx. (2.05 lbs)
ICD-4224: 860g approx. (1.9 lbs)
Standard Configuration ICD-4220 or ICD-4224 Camera 1 unit
Connector plug for auto iris lens (R05-PB3M) 1 pce
C mount adapter 1 pce
Instruction manual 1 vol
Design and specifications are subject to change without notice.
Home | All Products | Contact | Site Map