HOME ICD803/ICD803P
ICD-803 / 803P 1/2" OCML CCD

Digital Processing Low Light Color Camera


 

The ICD-803(NTSC)/803P(PAL) is a 1/2" single-chip CCD with 380,000 pixels(NTSC) and 410,000 pixles (PAL). It also employs AES (Automatic Electronic Shutter) and Auto Iris Function, and provides high-resolution, high-sensitivity, high-quality pictures.

  Digital Process
A DSP (Digital Signal Processing) for internal RGB is used to process video signals for crisp and consistent pictures.

High Quality Picture and High Resolution
Smear level -120dB, low noise circuit design, and appropriate detail compensation reproduce clear color images.

High Sensitivity Circuit Design
Employing a high-sensitivity 1/2" On-Chip-Micro Lens (OCML) CCD and digital signal processing, the camera delivers high sensitivity with a minimum illumination of 0.5 lux/f1.4.

Back Light Compensation
In conjunction with the auto-iris lens and AES, the BLC function enables effective Back Light Compensation.
Two Way Auto-iris Lens
The camera can support two types of auto-iris lenses, video iris lens with DC iris lens and most CCTV lenses can be used.

Auto White Balance
Auto White Balance(ATW1) of automatic tracking type is employed. Appropriate correction can be achieved to compensate for changes in color temperature of the object. Furthermore, ATW2 is also available to accommodate sodium light sources.

AES(Automatic Electronic Shutter)
The camera incorporates the AES function with a sensitivity ratio of 1:1300(NTSC), 1:1600(PAL). Sensitivity is adjusted automatically according to variations in illumination in a surveillance area. Images equivalent to those achieved with the auto-iris lens (F1.4 to f5.0)can be attained even with fixed-iris lens.

Specifications

Pickup Device 1/2" Interline Transfer CCD
Picture Element NTSC: 768(H) x 492(V), approx. 380,000 pixles
PAL: 752(H) x 582(V), approx. 410,000 pixles
Sync System Internal Crystal Lock or Line Lock (AC type)
External Sync: Genlock
Genlock Input VBS or VS 1.0Vp-p/75 ohms (High Impedance)
BBS 0.45Vp-p/75 ohms (High Impedance)
Video Output Composite VBS: 1.0Vp-p/75 ohms
Separate Y/C
Y: (VS)1.0Vp-p/75ohms, C: 0.286Vp-p/75ohms
Horizontal Resolution 480 TV Lines
S/N Ratio 52dB (p-p/rms)
(Under Luminance, Standard illumination, Detail off Weight on)
Minimum Illumination 0.5 lux/f1.4(AGC ON)
AGC ON/OFF Switchable >
Auto White Balance ATW1/ATW2/AWC/Manual Selectable, Adjustable
Detail Correction Built in Detail Level adjustable
Backlight Compensation ON/OFF Switchable
AES ON/OFF Switchable
AES Range NTSC: 1:1300, PAL: 1:1600
(Unable to work when power frequency does not
meet vertical frequency of the camera)
Electronic Shutter > Off, FL, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
(FL Flicker less NTSC: 1/100sec, PAL: 1/60 sec)
Auto Iris Function Video Iris/DC Iris Lens Switchable
Camera ID 1 Line, up to 16 characters
Local Setup Function Using 5 buttons and set on OSD (On Screen Display) Camera ID,
INT/LL, AES/Shutter, Wide Dynamic Range ON/OFF, 
Detail Correction, AGC ON/OFF, White Balance, Gain Control,
Chroma Level, HUE, Pedestal, Operation Lock
Remote Setup Using RCU-701
(Multiplex Transmission Function System),
all Local Setup Functions are available.
Flangeback Adjustment Built-in
Power Requirement
[ NTSC ]
AC120V+/-10%, 60Hz
AC24V +/-10%, 60Hz
DC12V (10.5 - 15V)
[ PAL ]
AC230V +/-20%, 50Hz
AC24V+/-10%, 50Hz
DC12V (10.5 - 15V)
Power Consumption > Less than 4.5W
Dimensions > W70 X H60 X D140mm
(W2.76 x H2.36 x D5.51 inches)
Ambient Temperature -10°C - +50°C (13.5°F - 122°F)
Weight Less than 1100g (2.42 lbs)
Camera Mount 1/4" -20UNC (Upper/Bottom Selectable)
Lens Mount CS Mount (C-mount adaptor can be used)
Input/Output Connector VBS Output:BNC
Genlock Input: BNC
Auto Iris Lens: 4P (D4-151N-100 or equivalent)
AC24V/DC12V Input: 2P Push in terminal
Accessories Operation Manual
C-mount Adaptor
Auto Iris Connector (E4-191J-100 or equivalent)
Design and specifications are subject to change without notice. «« Catalog (198KB)
Home | All Products | Contact | Site Map