| IK-CTLS-4 Video Sequential Switcher ( Looping / 4ch ) |
||
 
|
IK-CLTS-4 is a high performance 4x1 composite video sequential
switcher. The switcher is designed to handle up to four high resolution color video
sources and uses an external UL listed power supply to meet today's safety
requirements. Switching occurs during the vertical interval to minimize monitor roll.
| |
[Rear Panel] 
| ||
| ELECTRICAL: | |
| Power: | UL listed 12VDC power adapter (supplied) |
| Input Voltage: | 13.5 to 18VDC isolated ground |
| Power Consumption: | 1 watt |
| VIDEO: | |
| Input impedance: | 75 ohms(CTS) terminated / 10k ohms (CLS) looping |
| Output source impedance: | 75 ohms |
| Max video input: | 2vpp |
| Frequency Response: | 15mHz ± 0.7dB. |
| Gain: | Unity ± 3% |
| Differential Gain: | <0.5% |
| Differential Phase error: | <0.5 degrees |
| Max Htilt: | <1% |
| Max V tilt | <1% |
| OPERATIONAL: | |
| Switches: | 3 position toggle switch |
| Indicators: | LED lamp for each input |
| Sequence interval: | Variable: 1 sec. to 90 sec. |
| MECHANICAL: | |
| Connectors: | BNC |
| Power Connector: | 3.5 mm Phono, center positive |
| Height: | 1.70" |
| Width: | 5.00" |
| Depth: | 8.00" |
| Design and specifications are subject to change without notice. |
| Home | All Products | Contact | Site Map |