MLW-2425C: 24-inch Medical Grade Full HD LCD-Monitor
MLW-2425C is a wide screen 24-inch LCD monitor with the high resolution 1920(H) x 1080(V) Full HD LCD panel, 1.06 Billion colour graduation (10-bit x 3-Colour), maximum intensity of 400cd/m2 and wide angle of 178 degrees. The Jaggy-less IP conversion and Ikegami unique circuit enable to display more natural images. High performance with HD quality is provided for medical specialists and experts. HD signal input with RGB/Component and optional Multi-SDI input are available.
[Discontnued：Jan. 2016]
10-bit signal input is built-in MLW-2425C.10-bit signal process engine
10-bit signal processing based on Ikegami image processing technology allows the smooth gradation of colour.
10-bit LCD panel
Further smooth colour gradation can be achieved by processing 10 bit signal from signal input to display.Jaggy-less I/P conversion process
Ikegami unique Jaggy-less I/P conversion process enables the smooth and clear lines on the display.
Wide colour gamut
Wide colour gamut (102% of NTSC) can be represented with wider gamut than EBU/AMPTE standard. Colour gamut setting is selectable for user’s favorite.178 degrees high contrast viewing angle
LCD panel based on IPS technology is employed for 178 degrees high contrast viewing on UP/DOWN/LEFT/RIGHT. This characteristic prevents from intensity and colour shift by the viewing angle.
Applicable Various Input Signal
Applicable to HD signal (RGB, Component), NTSC/PAL signal (Composite, Y/C) and PC signal input (Analog RGB, Digital DVI-D). SD/HD-SDI signal input is available too.Multi-Display function with Side-by-Side and Picture-in-Picture
Two types of input images can be displayed simultaneously with and Side-by-Side and Picture-in-Picture display mode.
Flip function
Images can be flipped horizontally and vertically, allowing the correction of image inversion caused by the optics.Various Gamma Characteristics
Variety of Gamma setting can be set, including the Standard CRT Gamma of 2.2 and the DICOM Gamma.
Hue and Chroma setting for all kind of input signal
Colour can be adjusted flexibly for user’s favorite by Hue and Chroma.Anti-Refection hard coat Screen
Anti-Reflection hard coat screen is installed as standard to reduce the effect of the reflection and to protect the LCD panel.
IR remote controller
A remote controller can be attached as an option to help with setting up of the monitor when the it is installed at a high position.Display power management function
The chosen signal is not input for more than 30 seconds, the monitor automatically can turn OFF to save the power. The function can set ON/OFF.
User memory
Maximum four (4) settings can be set as preset. The parameter such as colour temperature, hue, chroma, gamma, R/G/B gain and display mode can be saved for each user or application.Maximum 30 meters length of DVI-D cable available
Signal compensation function is installed and the signal degradation is prevented. Then, maximum 30 meters length of DVI-D cable can be used with the monitor.
VESA mount available
A variety of installation brackets for arms and walls can be chosen with the combination of VESA mount.
LCD Panel Panel Size 24-inch Pixels 1920 x 1200 Display Size 518 x 324mm Aspect Ratio 16:10 Colour Gradient 10-bit x 3 (1.06B) Colour gamut Wide colour gamut View Angle 178°/ 178°(Typical) Input Signal SDTV Analog : VBS x 1ch
Y/C x 1ch
RGB or Y/Pb/Pr x 1ch (2ch is available with adding option module) *3
Digital : Multi-SDI x 1ch (2ch is available with adding option module) *3HDTV Analog : RGB or Y/Pb/Pr x 1ch (2ch is available with adding option module) *3
Digital : Multi-SDI x 1ch (2ch is available with adding option module) *3PC DVI :DVI-D x 1ch (2ch is available with adding option module) *3
RGB Analog : HD15P D-Sub x 1ch (2ch is available with adding option module) *3
Supported Resolution : VGA to WUXGAGeneral Multi Display Picture in Picture or Side by Side
Swap display is availableInvert Top and Bottom or Right and Left Function Standard Remote Terminal Parallel/Serial Resolutions (TVL) 1000 TV Line or more (at component input) Maximum Brightness 400cd/m2 Contrast Ration 1000:1 (Typical) Safety Approval UL60601-1, CSA C22.2No.601.1 EMC Approval FCC Class A, VCCI Class A Power Requirement AC100V to AC120V, AC200V to AC240V Power Consumption 130W Max Operation Temperature : 5 to 35°C
Humidity : 30 to 80% (non condensing)Storage Temperature : -20 to 60°C
Humidity : 30 to 90% (non condensing)Dimensions W583 x H422 x D109mm (excluding stand and protrusions) Weight 7.4kg or less (excluding stand) Accessories AC Power Cable, Manual
Ikegami Electronics (U.S.A.), Inc.
- In case of emergency, please fill it in the message field.
- This page is encrypted using SSL before transmission.
- Ikegami shall properly handle personal information in accordance with the privacy policy posted on our website.
- For additional information shall refer to "Privacy Statements" on our website.
- Please fill-out all fields for sign up, click "Confirm" button.
- Preffered to fill in English.
In case, if you are accessing from European Union (EU) countries, please use Ikegami Europe official site, contact form to comply with the EU General Data Protection Regulation (GDPR). [Contact form: http://www.ikegami.de/contact.html]
MLW-2425C: 24-inch Medical Grade Full HD LCD-Monitor
MLW-2425C is a wide screen 24-inch LCD monitor with the high resolution 1920(H) x 1080(V) Full HD LCD panel, 1.06 Billion colour graduation (10-bit x 3-Colour), maximum intensity of 400cd/m2 and wide angle of 178 degrees. The Jaggy-less IP conversion and Ikegami unique circuit enable to display more natural images. High performance with HD quality is provided for medical specialists and experts. HD signal input with RGB/Component and optional Multi-SDI input are available.
[Discontnued：Jan. 2016]
English
Français
Português
Español