HDK-790GX
State-of-the-Art 16-bit Full Digital HDTV Camera System
Discontinued Product
The HDK-790GX are high quality multi-purpose high end camera models reproducing the quality of Ikegami’s EX-series cameras, and adding new features and accessories associated with the new Unicam HD series.They can be used for studio, as well as, field applications.
2/3-inch 2.3 Mega pixel AIT CCDs
Three 2/3-inch 2.3 Mega pixel AIT CCDs are employed to achieve 1000 TVL horizontal resolution with high signal to noise ratio of 61dB at F10 (1080/59.94i) or F11 (1080/50i) sensitivity.
Newly developed FPGA with advanced full digital process ASIC
The HDK-790GX incorporates a newly developed FPGA together with advanced full digital process ASIC to achieve outstanding picture performance.
Video processing technology to maximize the benefit of 16-bits
This camera is designed from the start based on 16-bit A/D and matching 16-bit DSP to maximize the benefits of high bit quantization. Especially for the dark areas of the picture, the higher gradation for gamma and other circuits improves the reproduction, providing for more natural color in the shadow areas of the picture.
Advanced features made possible with digital technology
Advanced features such as Master Gain Control, Variable Color Temp., Custom Gamma functions are incorporated.
Digital Extender
There is the selection of x1.5, x2, x3, x4 digital extender available to enlarge the image at the center of shot without any loss in image sensitivity. * It will reduce the resolution of the image.
Lens Aberration Correction Function
The Lens Aberration Correction Function is newly incorporated for minimizing the loss of resolution and colored edges caused mainly by lens chromatic aberration.
2 Channels QTV
Two channels of QTV output (VBS) are available at the camera for prompter and external monitoring purposes. * BS/CCU should support 2 channels of QTV.
HD SDI Trunk
When the camera is operating with CCU-970M, the system allows 3G (1.5G x2) transmission from the camera head to the CCU, and a second 1.5G video can be transmitted to the CCU as a video trunk channel.
Built-in Triple Layer Filter (ND/EFF/ECC)
The triple layer filter system can be remotely controlled from OCP/MCP. The three layers are ND (100%, 25%, 6.2%, 1.6%), EFFECT (Clear, Cross, Snow, Fog) and Electronic Color Compensation (ECC: 3200K/4300K/ 5600K/6300K/8000K).In addition, there is Variable Color Temp. function that enables the camera operator to continuously vary the color temperature from 2,000k to 20,000k for easy and precise adjustment.
Camera Operator Assist Functions
There are two types of camera operator assist functions incorporated in the HDK-790GX camera head.The viewfinder detail(VF DTL) function allows the camera operator to increase the detail edges to the viewfinder video for easy-focusing. In addition, the Quick EZ Focus (Focus Assist) function is a newly incorporated useful tool, providing very distinct enhancement to the viewfinder signal to enable the camera operator to make critical focus adjustment.
Moire Reduction Filter (Factory Option)
An Anti-Moire Optical Low-Pass Filter can be fitted in the filter wheel to reduce unwanted moire video patterns when shooting a large LED screen, etc.
Supporting Formats | 1080i (59.94Hz or 50Hz) Y,Pb,Pr 4:2:2 Interlaced 1080psf (29.97Hz or 25Hz) Y,Pb,Pr 4:2:2 Interlaced |
|||||
Image Sensors | 2/3-inch 2.3 million pixel AIT CCD | |||||
Optical system | 2/3-inch RGB prism, f1.4 | |||||
Lens Mount | BTA- S1005B | |||||
Filter | 1 | 2 | 3 | 4 | 5 | |
ND | 100% | 25% | 6.2% | 1.6% | CAP | |
I | II | III | IV | V | ||
Effect | CLEAR | CROSS | SNOW | FOGGY | CLEAR | |
A | B | C | D | E | ||
ECC | 3200K | 4300K | 5600K | 6300K | 8000K | |
Sensitivity | F10 (1080/59.94i) / F11 (1080/50i) typical at 2000 lx (White reflection 89.9%) | |||||
S/N | 61dB typical (HDTV) | |||||
Limiting Resolution | 1000TV lines | |||||
Modulation Depth | 50% or more(1080i/59.94Hz) | |||||
Variable Color Temperature | 2,000k~20,000k variable | |||||
Electric Shutter | 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000 | |||||
Detail Correction | Vertical : 5 lines Horizonta : Boost frequency: 13MHz~22MHz (HDTV) | |||||
Gamma | OFF, 0.35, 0.4, 0.45 | |||||
Gain | -6dB, -3dB, 0dB, +3dB, +6dB, +9dB, +12dB, +18dB | |||||
Operating Temperature | -20℃ ~ +45℃ (-4°F ~ 113°F) | |||||
Operating Humidity | 30% ~ 90% (Non-condensing) | |||||
Operating Voltage | AC100/110/117/220/240V ±10% | |||||
Weight | Approx 24kg (52.9lbs) | |||||
Dimensions | W315×H328×D398mm (excluding VF) (W12.37×H12.87×D15.62 inches) |
|||||
Input Signals | ||||||
External Sync Signal | SYNC 0.6Vp-p ±6dB 75ohm 1ch | |||||
Audio Signal | -60dB~+4dB (Variable)/-20dB (Fixed) 2ch (600 ohm Balanced) | |||||
Intercom Signal | XLR Type or 110 Type CN 2ch | |||||
Video Trunk | Serial Digital 75 ohm 1ch (Option) *Option and BS/CCU must support Video Trunk. | |||||
Output Signals | ||||||
HD SDI Signal | Serial Digital 75 ohm 1ch | |||||
Q-TV Signal | VBS signal 1ch Standard or VF / RET / MON / HD-QTV (MENU Selection) Serial Digital 75 ohm BNC 1ch (Factory Option) *Optional HD-QTV(Trunk) module should be installed in the CCU. VBS signal 2ch *Option and BS/CCU must support 2 channels of QTV. |
|||||
MON Video Signal | VF / RET / MON (MENU Selection) Serial Digital 75 ohm BNC 1ch | |||||
HD QTV | Serial Digital 75 ohm 1ch (Option) *Optional HD-QTV(Trunk) module must be installed in the CCU. |
|||||
Intercom Signal | 0 dBs 4ch (ENG/PROD/PGM1/PGM2), XLR Type or 110 Type CN | |||||
DC Output | +12VDC 500mA (max), 4-pin type 1ch |
3G Camera Control Unit:CCU-970
3G Base Station:BS-97
Ethernet Capable Operation Control Panel:OCP-300
7.4-inch OLED Viewfinder:VFE740HD
Control Panel Hub / Base Station Hub:CPH-200E / BSH-200E
3G Camera Control Unit:CCU-980
Operation Control Panel:OCP-100
9-inch Multi-Format Color LCD-Viewfinder:VFL912HD
19-inch Full-rack Camera Control Unit:CCU-970M
Master Control Panel / Operation Control Panel :MCP-200 / OCP-200
3G Base Station:BS-98
- Personal information is required
- Software
To download these information, personal information is required. Click the right blue button to download. :Personal information is not required.
Peripherals
-
CCU-970
3G Camera Control Unit
-
CCU-980
3G Camera Control Unit
-
CCU-970M
19-Inch Full-rack Camera Control Unit
-
BS-98
3G Base Station
-
BS-97
3G Base Station
-
OCP-300
Network Operation Control Panel
-
OCP-100
Operation Control Panel
-
MCP-200 / OCP-200
Master Control Panel / Operation Control Panel
-
VFE740HD
7.4-inch OLED Viewfinder
-
VFL912HD
9-inch Multi-Format Color HD LCD-Viewfinder
-
CPH-200E / BSH-200E
Control Panel Hub / Base Station Hub